Last Updated on January 9, 2019 by Admin
What source IP address does a router use by default when the traceroute command is issued?
- the highest configured IP address on the router
- a loopback IP address
- the IP address of the outbound interface
- the lowest configured IP address on the router
Explanation:When sending an echo request message, a router will use the IP address of the exit interface as the source IP address. This default behavior can be changed by using an extended ping and specifying a specific source IP address.
For All Questions: ITN Final Exam Answers All in One Full 100% 2019
What source IP addresses does a router use by default when the traceroute command is issued?
What source IP address does a router use by default when the traceroute command is issued? Explanation: When sending an echo request message, a router will use the IP address of the exit interface as the source IP address.
What does the first IP address represent in the traceroute?
The first line of the tracert output describes what the command is doing. It lists the destination system (example.com), destination IP address (10.10. 242.22), and the maximum number of hops that will be used in the traceroute (30).
How do I specify source IP in traceroute?
In the Command Prompt window, type 'tracert' followed by the destination, either an IP Address or a Domain Name, and press Enter. The command will return output indicating the hops discovered and time (in milliseconds) for each hop.
What is traceroute IP address?
Traceroute, also called tracepath or tracert, is a network tool used to determine the “path” packets take from one IP address to another. It provides the hostname, IP address, and the response time to a ping. Enter the IP address that you want to lookup.