A real image and a virtual image are different forms of image. The main difference between real and virtual images lies in the way in which they are produced. A real image is formed when rays converge, whereas a virtual image occurs when rays only appear to diverge. Let us look at more differences between real images and virtual images in this article. Show
To obtain a real image the light source and the screen must be placed on the same plane. Real images are obtained using a converging lens or a concave mirror. The size of the real image depends upon the placement of the object. A virtual image is an upright image that is achieved where the rays seem to diverge. A virtual image is produced with the help of a diverging lens or a convex mirror. A virtual image is found by tracing real rays that emerge from an optical device backwards to perceived or apparent origins of ray divergences. Because the rays never really converge, a virtual image cannot be projected onto a screen.
Therefore, we can say that the difference between real and virtual images is that the real image can be obtained on the screen whereas the virtual image cannot be obtained on the screen. Ray Diagram of a Real ImageFollowing is the ray diagram of the real image: Ray Diagram of a Virtual ImageFollowing is the ray diagram of the virtual image: These were some differences between the real image and the virtual image. If you wish to find out more, download BYJU’S The Learning App. Every time you look into a mirror, your brain is getting fooled into thinking there is another person on the other side. Watch the video to understand why this happens.RELATED ARTICLES: Frequently Asked Questions – FAQs
A real image occurs when the rays converge. A real image is always formed below the principal axis, so these are inverted whereas a virtual image is always formed above the principal axis so these are always erect. No, real images can be either smaller or larger than the object. But real images are always inverted. As this type of image is formed due to the imaginary intersection of light rays, it is called a virtual image. Stay tuned to BYJU’S and Fall in Love with Learning! In this lesson, we will discuss image formation in concave mirrors. However, before we delve into the topic let us quickly recall what a concave mirror is and the principles behind its working. A concave mirror is a type of spherical mirror in which the reflecting surface is the inner curved surface of the sphere, i.e. in this type of mirror the reflecting surface seems to be away from the incident light source. Because of their shape, the incident light is reflected inwards (converged), thus they are also called converging mirrors and they are used for focusing light. Both laws of reflection are valid at every point on the curved surface of the mirror. The normal is drawn along the radius, i.e. it is drawn by joining the centre of curvature of the mirror to the point of incidence. The convergence of the rays after reflection is because the normal to the reflecting surface differs at each point on the mirror. There is a formation of different images in a concave mirror. It mainly depends on the distance between the object and the mirror. Concave mirrors form both real and virtual images. When the concave mirror is placed very close to the object, a virtual and magnified image is obtained and if we increase the distance between the object and the mirror, the size of the image reduces and real images are formed. These real images can be projected on a screen. The focal point and the centre of curvature of the concave mirror lie in front of the mirror. Also Read: Image Formation in Convex Mirror Important Terms
Ray diagrams are necessary for understanding the formation of an image by a concave mirror. For constructing ray diagrams and for the better understanding of the image formation, we should consider at least two incident rays coming from the object. The intersection of these two rays after reflection gives the position of the image of the object. For a concave mirror any of the following four ray diagrams can be used for locating the image formed: a) A ray parallel to the principal axis, after reflection, will pass through the principal focus of a concave mirror. b) A ray which is passing through the principal focus of a concave mirror, after reflection, will emerge parallel to the principal axis. c) A ray passing through the centre of curvature of a concave mirror, after reflection, is reflected along the same path. The light rays come back along the same path because the incident rays fall on the mirror along the normal to the reflecting surface. d) A ray incident obliquely to the principal axis, towards the point P (pole of the mirror), on the concave mirror, is reflected obliquely. The incident and reflected rays follow the laws of reflection at point P, making equal angles with the principal axis. Concave Mirror Image formationRays emerging from a point meet at another point after reflection, and that point is called the image of the first point. The image is real if the rays converge to the point and it is virtual if the rays do not meet it but appear to diverge from a point when the rays are produced backwards. During image formation we assume that the rays are paraxial, i.e., they are incident at points close to the pole P of the mirror and make small angles with the principal axis. For a concave mirror, we consider six positions of the object before the mirror. Also Read: Differences Between Concave and Convex Mirror 1. When the object is placed at infinity, 2. When the object is placed beyond C (centre of curvature) 3. When the object is placed at C 4. When the object is placed between C and F (principal focus) 5. When the object is placed at F 6. When the object is placed between F and P (Pole) When the Object is at InfinityIn this condition, we consider two rays parallel to the principal axis originating from the object. These rays after reflection converge and form an image at F, the principal focus of the mirror, in front of the mirror. The image thus formed is highly diminished, point size, real and inverted. The Object is Placed Beyond CIn this situation we consider two different rays emerging from the object. One parallel to the principal axis and the other directed towards the centre of curvature of the mirror. These rays after reflection from an image between the centre of curvature (C) the focus (F). The image thus formed is diminished, real and inverted. The Object is Placed at CHere the two rays emerging from the object are one parallel to the principal axis and other passing through the focus of the mirror. These rays after reflection from an image at point C. the image formed has the same size as that of the object and it is real and inverted. The Object is Placed Between C and FHere the two rays considered are one parallel to the principal axis and other passing through the principal focus of the concave mirror. The image is formed beyond C. The image is larger compared to the size of the object and it is real and inverted. The Object is Placed at FThe rays considered here are one parallel to the principal axis and other passing through the centre of curvature of the mirror. This results in the formation of a highly enlarged image which is real and inverted, at infinity. The Object is Placed Between F and PThe rays considered here are, one going parallel to the principal axis and other passing through the centre of curvature of the mirror. The image formed here is virtual and erect and it is larger than the object. Image Formation Tabular Data
Sign ConventionsFor deriving the relevant formulas for reflection by spherical mirrors, there is a standard sign convention for measuring distances. The normally used convention is the Cartesian sign convention. According to this convention, all the distances are measured from the pole of the mirror, i.e. the pole (P) of the mirror is assumed as the origin. The principal axis of the mirror is taken as the x-axis of the coordinate system. The conventions are as given below:
Relation Between Radius of Curvature and Focal LengthConsider a ray parallel to the principal axis striking the concave mirror at a point M on its reflecting surface. Then CM will be perpendicular to the mirror at the point M. Let θ be the angle of incidence, and MD be the perpendicular from M to the principal axis. Then from the figure, ∠MCP = θ and ∠MFP = 2θ Now, Tanθ = MD / CD and tan2θ = MD / FD For small values of θ, which is true for paraxial rays, tan θ ≈ θ and tan 2θ ≈ 2θ Therefore, MD / FD = 2 X MD / CD or FD = CD / 2 Now, FD = f and CD = R, therefore the above equations becomes f = R / 2 This is from the assumption that for small values of θ point D is very close to the point P. Mirror EquationThe figure shows two rays emerging from the object. These rays after reflection form an image A’B’. From the geometry of ray diagrams, the two right-angled triangles ABF and MPF are similar. This is because, for paraxial rays, the line MP can be considered to be a straight line perpendicular to CP. Therefore, B’A’ / PM = B’F / FP or B’A’ / BA = B’F / FP (Since PM = AB) ………………… (1) Since ∠APB = ∠A’PB’, the right-angled triangles A’B’P and ABP are also similar. Therefore, B’A’ / BA = B’P / BP ……………… (2) Comparing the equations (1) and (2), we get, B’F / FP = B’P – FP / FP = B’P / BP This is the relationship involving the magnitude of distances. In a spherical mirror, the distance of the object from its pole is called the object distance (u) and the distance of the image from the pole is called the image distance (v). As mentioned earlier the distance of the principal focus from the pole is called the focal length (f). Substituting u, v, an d f by following the sign convention, we get, -v + f / -f = -v / -u or v – f / f = v / u or 1 / u + 1 / v = 1 / f This equation is known as the mirror equation. This is valid for both convex and concave mirror. Linear Magnification (m)Linear magnification (m) is the ratio of the height of the image (h’) to the height of the object (h). m = h’ / h h’ and h are given a positive or negative value as per the Cartesian sign convention. In triangles A’B’P and ABP, we have B’A’ / BA = B’P / BP By applying sign convention, we get m = h’ / h = – v / u A negative sign for the value of magnification indicates that the image is real and a positive sign indicates that the image is virtual. Solved Questions1. An object is found to be 5cm in front of a concave mirror of radius of curvature 15 cm. Determine the position, nature, and magnification of the image in each case. Answer: focal length, f = =15/2 cm = 7.5 cm u = -5 cm Applying the mirror formula, we get, 1 / V + I / -5 = 1 / -7.5 1 / V = I / -7.5 + 1 / 5 = 1 / 15 Therefore, v =15 cm Thus a virtual and erect image is formed at 15 cm behind the mirror. Magnification, m = – v / u = 15 / -5 = 3 Thus the image formed is virtual, erect and magnified by a factor of 3. 2. An object, 4 cm in size, is placed at 25 cm in front of a concave mirror of focal length 15 cm. At what distance from the mirror should a screen be placed to obtain a sharp image? Determine the nature and the size of the image. Answer: Object size, h = + 4 cm Object distance, u = – 25 cm Focal length, f = –15 cm By using mirror equation, 1 / V = I / -15 – 1 / -25 = – 1 / 15 + 1 / 25 1 / V = -5 + 3 / 75 = 2 / 75 i.e. v = – 38.5 cm To get the image on the screen, the screen should be placed at a distance of 38.5 cm from the mirror. Magnification, m = h’ / h = – v / u Therefore, h’ = – vh / u = (-38.5 x 4) / -25 = 6.16 Height of the image, h’ = 6 cm, so the image formed is real, inverted and enlarged. Uses of Concave MirrorsConcave mirrors are used in many instances. Some of the common ones are given below.
Video Lesson – Paraxial RaysRay Optics – Total Internal ReflectionRay Optics – Important JEE Questions Ray Optics – Most Important TopicsRay Optics – PrismRay Optics – Refraction through LensRay Optics – Lens combinationRay Optics – Refraction Through Spherical SurfaceLens Maker’s Formula Frequently Asked Questions on Image Formation in Concave MirrorThe concave mirrors are used in torches, telescopes, head mirrors, solar furnaces, headlights etc. Both
real and virtual images are formed by the concave mirrors. The focal length of the concave mirror is negative. The concave mirror has a reflecting surface bent inwards. What term refers to the size of an object in relation to the size of another object?Scale refers to the size of an object (a whole) in relationship to another object (another whole).
What is the relative size?Relative size refers to the fact that the more distant an object, the smaller its image will be on the retina. Therefore, if there are two identical objects, the one that is farther away will be the one that has a smaller image on the retina.
Which term is the comparison of size between an object to another object?In art and design, the principle of scale refers to the relative size of one object compared to another, typically the size of the artwork to the viewer's body. Scale can also refer to the size relationships of different visuals within a singular piece of art.
What is relative size in art?Relative Size refers to clues in the picture that help you figure out the size of objects. Playing with relative size forces the viewer to imagine something much bigger or much smaller than seemingly possible.
|