What is the relationship between validity and reliability can a test be reliable and yet valid illustrate?

These two terms, reliability and validity, are often usedinterchangeably when they are not related to statistics. When critical readersof statistics use these terms, however, they refer to different properties ofthe statistical or experimental method.

Reliability is another term for consistency. If one person takes the samepersonality test several times and always receives the same results, the test isreliable.

A test is valid if it measures what it is supposed to measure. If theresults of the personality test claimed that a very shy person was in factoutgoing, the test would be invalid.

Reliability and validity are independent of each other. A measurement maybe valid but not reliable, or reliable but not valid. Suppose your bathroomscale was reset to read 10 pound lighter. The weight it reads will be reliable(the same every time you step on it) but will not be valid, since it is notreading your actual weight.

EXPLORING RELIABILITY IN ACADEMIC ASSESSMENT

Written by Colin Phelan and Julie Wren, Graduate Assistants, UNI Office of Academic Assessment (2005-06)

Reliability is the degree to which an assessment tool produces stable and consistent results.

Types of Reliability

1. Test-retest reliability is a measure of reliability obtained by administering the same test twice over a period of time to a group of individuals.  The scores from Time 1 and Time 2 can then be correlated in order to evaluate the test for stability over time. 

Example:  A test designed to assess student learning in psychology could be given to a group of students twice, with the second administration perhaps coming a week after the first.  The obtained correlation coefficient would indicate the stability of the scores.

1. Parallel forms reliability is a measure of reliability obtained by administering different versions of an assessment tool (both versions must contain items that probe the same construct, skill, knowledge base, etc.) to the same group of individuals.  The scores from the two versions can then be correlated in order to evaluate the consistency of results across alternate versions. 

Example:  If you wanted to evaluate the reliability of a critical thinking assessment, you might create a large set of items that all pertain to critical thinking and then randomly split the questions up into two sets, which would represent the parallel forms.

1. Inter-rater reliability is a measure of reliability used to assess the degree to which different judges or raters agree in their assessment decisions.  Inter-rater reliability is useful because human observers will not necessarily interpret answers the same way; raters may disagree as to how well certain responses or material demonstrate knowledge of the construct or skill being assessed. 

Example:  Inter-rater reliability might be employed when different judges are evaluating the degree to which art portfolios meet certain standards.  Inter-rater reliability is especially useful when judgments can be considered relatively subjective.  Thus, the use of this type of reliability would probably be more likely when evaluating artwork as opposed to math problems.

1. Internal consistency reliability is a measure of reliability used to evaluate the degree to which different test items that probe the same construct produce similar results. 

1. Average inter-item correlation is a subtype of internal consistency reliability.  It is obtained by taking all of the items on a test that probe the same construct (e.g., reading comprehension), determining the correlation coefficient for each pair of items, and finally taking the average of all of these correlation coefficients.  This final step yields the average inter-item correlation. 

1. Split-half reliability is another subtype of internal consistency reliability.  The process of obtaining split-half reliability is begun by �splitting in half� all items of a test that are intended to probe the same area of knowledge (e.g., World War II) in order to form two �sets� of items.  The entire test is administered to a group of individuals, the total score for each �set� is computed, and finally the split-half reliability is obtained by determining the correlation between the two total �set� scores.

Validity refers to how well a test measures what it is purported to measure. 

Why is it necessary?

While reliability is necessary, it alone is not sufficient.  For a test to be reliable, it also needs to be valid.  For example, if your scale is off by 5 lbs, it reads your weight every day with an excess of 5lbs.  The scale is reliable because it consistently reports the same weight every day, but it is not valid because it adds 5lbs to your true weight.  It is not a valid measure of your weight.

Types of Validity

1. Face Validity ascertains that the measure appears to be assessing the intended construct under study. The stakeholders can easily assess face validity. Although this is not a very �scientific� type of validity, it may be an essential component in enlisting motivation of stakeholders. If the stakeholders do not believe the measure is an accurate assessment of the ability, they may become disengaged with the task.

Example: If a measure of art appreciation is created all of the items should be related to the different components and types of art.  If the questions are regarding historical time periods, with no reference to any artistic movement, stakeholders may not be motivated to give their best effort or invest in this measure because they do not believe it is a true assessment of art appreciation.

2. Construct Validity is used to ensure that the measure is actually measure what it is intended to measure (i.e. the construct), and not other variables. Using a panel of �experts� familiar with the construct is a way in which this type of validity can be assessed. The experts can examine the items and decide what that specific item is intended to measure.  Students can be involved in this process to obtain their feedback.

Example: A women�s studies program may design a cumulative assessment of learning throughout the major.  The questions are written with complicated wording and phrasing.  This can cause the test inadvertently becoming a test of reading comprehension, rather than a test of women�s studies.  It is important that the measure is actually assessing the intended construct, rather than an extraneous factor.

3. Criterion-Related Validity is used to predict future or current performance - it correlates test results with another criterion of interest.

Example: If a physics program designed a measure to assess cumulative student learning throughout the major.  The new measure could be correlated with a standardized measure of ability in this discipline, such as an ETS field test or the GRE subject test. The higher the correlation between the established measure and new measure, the more faith stakeholders can have in the new assessment tool.

4. Formative Validity when applied to outcomes assessment it is used to assess how well a measure is able to provide information to help improve the program under study.

Example:  When designing a rubric for history one could assess student�s knowledge across the discipline.  If the measure can provide information that students are lacking knowledge in a certain area, for instance the Civil Rights Movement, then that assessment tool is providing meaningful information that can be used to improve the course or program requirements.

5. Sampling Validity (similar to content validity) ensures that the measure covers the broad range of areas within the concept under study.  Not everything can be covered, so items need to be sampled from all of the domains.  This may need to be completed using a panel of �experts� to ensure that the content area is adequately sampled.  Additionally, a panel can help limit �expert� bias (i.e. a test reflecting what an individual personally feels are the most important or relevant areas).

Example: When designing an assessment of learning in the theatre department, it would not be sufficient to only cover issues related to acting.  Other areas of theatre such as lighting, sound, functions of stage managers should all be included.  The assessment should reflect the content area in its entirety.

What are some ways to improve validity?

1. Make sure your goals and objectives are clearly defined and operationalized.  Expectations of students should be written down.
2. Match your assessment measure to your goals and objectives. Additionally, have the test reviewed by faculty at other schools to obtain feedback from an outside party who is less invested in the instrument.
3. Get students involved; have the students look over the assessment for troublesome wording, or other difficulties.
4. If possible, compare your measure with other measures, or data that may be available.

 References

American Educational Research Association, American Psychological Association, &

National Council on Measurement in Education. (1985). Standards for educational and psychological testing. Washington, DC: Authors.

Cozby, P.C. (2001). Measurement Concepts. Methods in Behavioral Research (7th ed.).

California: Mayfield Publishing Company.

Cronbach, L. J. (1971). Test validation. In R. L. Thorndike (Ed.). Educational

Measurement (2nd ed.). Washington, D. C.: American Council on Education.

Moskal, B.M., & Leydens, J.A. (2000). Scoring rubric development: Validity and

reliability. Practical Assessment, Research & Evaluation, 7(10). [Available online: http://pareonline.net/getvn.asp?v=7&n=10].

The Center for the Enhancement of Teaching. How to improve test reliability and

validity: Implications for grading. [Available online: http://oct.sfsu.edu/assessment/evaluating/htmls/improve_rel_val.html].

What is the relationship between reliability and validity of test?

What is the relationship between reliability and validity example?

What is the relationship between the reliability and the validity of a psychological test?

Can a test be reliable but not valid or can it be valid but not reliable?